Descriptions of cooling accessories:

Screws for extensible clip

Spring Nuts

Cushion

Hexagonal screws

Extensible clip
The Pitch List of Graphic Card:
VGA Model No.
Pitch
Pitch Position

Nvidia

GeForce 4 MX 420/440/460
GeForce 4 MX 440 SE/440 8X
GeForce FX 5200/5500/5600/5700


A
(54.8mm)

ATI

RADEON 9000/9000 PRO
RADEON 9200/9200 PRO
RADEON 9500/9500
RADEON 9600/9600 SE/9600PRO/9600XT
RADEON 9700/9700 PRO/9800 PRO/9800XT
RX300/600/800

Nvidia

GeForce 4Ti 4200/4200 8X
GeForce 4Ti 4400/4600/4800
GeForce FX 5600 UL TRA/5700 UL TRA
GeForce FX 5900/5900 XT
GeForce FX 5950 UL TRA
GeForce FX 6600/6600GT
B
(79.7mm)
Nvidia

GeForce 6800/6800GT
GeForce 7800/7800GT
C
(75.4mm)
ATI

Radeon X1300 Series
Radeon X1600 Series
Radeon X1800 Series
D
Installation Guide :
Pitch A, Pitch B, Pitch C:
 
Apply the proper amount of thermal paste on the GPU die.
 
Find the right position according to the pitch of VGA card. And lock the Hexagonal screws on
the cooler bracket.
 
Put the cushions into the hexagonal screws.
 
Then, put the cooler into the pitch of VGA card and put another cushions on each screws.
 
Lock the spring nuts with screws.
( P.S : Please lock it loosen first , then make sure these 2(4) pcs spring nuts already lock it ). Then , screw it tighten.
 
Connect the power.
   
Finish installation.
   
Pitch D:
 
Apply the proper amount of thermal paste on the GPU die.
 
Find the right position according to the pitch of VGA card. And lock the Hexagonal screws on
the cooler bracket.
 
Put the cushions into the hexagonal screws.
 
Then, put the cooler into the pitch of VGA card and put another cushions on each screws.
 
Lock the spring nuts with screws.
( P.S : Please lock it loosen first , then make sure these 2(4) pcs spring nuts already lock it ). Then , screw it tighten.
 
Connect the power.
   
Finish installation.
   
Special for Nvidea 6600 AGP:
 
Apply the proper amount of thermal paste on the GPU die.
 
Take the extensible clip and lock it on A position.
( Please lock it loosen first )
 
Put the hexagonal screws and aim at the extensible clip , then screw it tighten.
 
Put the cushions into the hexagonal screws.
 
To adjust the hexagonal screws to meet with the pitch of VGA card.
( Please make sure the heat sink block must stay close to GPU die. )
 
Take out the VGA card first. Then tighten the screws of extensible clip.
 
Put the cushions into the hexagonal screws.
 
Then, put the cooler into the pitch of VGA card and put another cushions on each screws.
 
Lock the spring nuts with screws.
( P.S : Please lock it loosen first , then make sure these 2(4) pcs spring nuts already lock it ). Then , screw it tighten.
 
Connect the power.
   
Finish installation.
   
Copyright EVERCOOL Thermal Co., Ltd. 2008. All Rights Reserved.