|
 |
|
|
|
|
| Please take off the fan
first for easy to install. |
|
|
| Apply
the preper amount of thermal paste on the North
bridge die. |
|
|
|
|
|
| Take off the protection
cover from bottom of main unit, and put the metal
clip into the fillister of block. |
|
|
| Hook the both ckips into
the hole of Northbridge. |
|
|
|
|
|
|
|
| Assemble the fan to main
unit. (Or you can choose take off the fan to kep
silent environment.). |
|
| |
|
|
|
|
|
|
|
 |
|
|
|
|
| Please take off the fan
first for easy to install. |
|
|
| Apply
the preper amount of thermal paste on the North
bridge die. |
|
|
|
|
|
| Put the cooler, and aim
the push pin at the position. |
|
|
| Install the push pin to
right position. |
|
|
|
|
|
| Assemble the fan to main
unit. (Or you can choose take off the fan to kep
silent environment.). |
|
|
|
|
|
|
|
|
|
|
|
|
Notice: Please
pay attention at direction
of main unit. If it obstruct by other components, please
change the clip position as picture showed. |
|
