|
| For INTEL-Pentium
D / P4(LGA775) |
|
|
|
| Apply the proper amount
of thermal paste on the CPU die. |
|
|
| Put the cooler onto the CPU die and fit with hole position. |
|
|
|
|
|
| Holding the cooler and the mainboard then reverse then to back side. |
|
|
| Put the relention holder on the motherboard and screw it step by step. |
|
|
|
|
|
|
|
| To connect the power connector with speed control . |
|
|
|
|
|
| Connet the power with motherboard . |
|
|
|
| |
| For AMD
- Athelon 64. Opteron (Socket 754/939/940/AM2) |
|
|
|
| Remove the orignial K8 relation holder. |
|
|
| Apply the proper amount
of thermal paste on the CPU die. |
|
|
|
|
|
| Remove the Transformer6's original P4 clip . |
|
|
| Instert the K8 clip into the bottom of the cooler and fit the clip into the mainboard. |
|
|
|
|
|
| Holding the cooler and the mainboard then reverse them to back side. |
|
|
| Put on the back holder into the main board and screw it on . |
|
|
|
|
|
| Reverse the cooler and the mainboard to front side. |
|
|
| To connect the power connector with speed control. |
|
|
|
|
|
| Connect the power with motherboard. |
|
|
|
