For INTEL-Pentium D / P4(LGA775)
 
Apply the proper amount of thermal paste on the CPU die.
 
Put the cooler onto the CPU die and fit with hole position.
 
Holding the cooler and the mainboard then reverse then to back side.
 
Put the relention holder on the motherboard and screw it step by step.
 
Connect the power.
 
Finished installation.
 
For AMD - Athelon 64. Opteron (Socket 754/939/940/AM2)
 
Take out the orignial CPU cooler.
 
Apply the proper amount of thermal paste on the CPU die.
 
Put the main unit onto the middle of plastic holder.
 
Put the clip down into the one side of retersion holder.
 
Lock the other clip from left to right.
 
Connect the power.
   
Finished installation.
   
Copyright EVERCOOL Thermal Co., Ltd. 2008. All Rights Reserved.