For AMD Opteron / Athlon 64 / Athlon 64 FX / Sempron
 
Take off the sharks cover from main unit.
 
Put the k8 clip downward of the main unit.
 
Then, take back the sharks cover and screw it.
 
Apply the proper amount of thermal paste on the CPU die.
 
Place the main unit onto the CPU die, and
put the clip down into the one side of retention holder.
 
Then, lock the other clip from left to right.
 
Connect the power.
 
Finished installation.
 
For INTEL LGA775
 
Please remove the original CPU cooler,
put the retention clip into the motherboard.
 
Put the clip with block of main unit, then
screw it.
 
Apply the proper amount of thermal paste on the CPU die.
 
Place the main unit onto the CPU die, and
the clip go through the retention clip.
 
Lock the attached screws of clip step by step.
 
Connect the power.
   
Finished installation.
   
Copyright EVERCOOL Thermal Co., Ltd. 2008. All Rights Reserved.