BUFFALO cpu cooler
Published 2010-12-03
Additional remarks
Clip A supports for Intel LGA 1366 / 1156 / 1155.
Clip B supports for Intel LGA 775 / 1156 / 1155.
Suggestion: Clip A is more suitable for using with Intel LGA 1156.
For Intel-LGA 2011
STEP 1
Use the screwdriver to dismantle the original clips and keep the screws.
STEP 2
Dismantle the fan.
STEP 3
Screw the clips of LGA 2011.
STEP 4
Evenly spread the thermal paste on the CPU surface.
STEP 5
Put the springs of LGA 2011 through the screws,and screw them on the holes of the motherboard.(Remark: Please screw them up diagonally).
STEP 6
Install the fan on the side of the heatsink.
STEP 7
Plug in the fan connector into the socket.
STEP 8
Finish the installation.
For- Pentium D/P4 (LGA775) / LGA 1366 / LGA 1156 / LGA 1155
STEP 1
Apply the proper amount of thermal paste on the CPU die.
STEP 2
Aim the push pin at the position each.
STEP 3
Push them into the motherboard one by one.
STEP 4
Connect the power.Finished installation.
For AMD-Athelon 64 / Opteron (Socket 754 / 939 / 940 / AM2 / AM2 + / AM3)
STEP 1
Apply the proper amount of thermal paste on the CPU die.
STEP 2
Then,put the clip down into the one side of retension holder.
STEP 3
Put the clip into the other side of retention holder.Lock the other clip from left to right.
STEP 4
Connect the power.Finished installation.
COPYRIGHT EVERCOOL THERMAL CO.,LTD. 2013. ALL RIGHTS RESERVED